Open back lintels are for use in cavity wall construction as it allows masonry to be built up continuously on both outer and inner leaf. The CH90/100 lintel supports uniform distribution of masonry loads, timber floors and roof loads. Also suitable for fair faced inner leaf masonry.
Archives: QMG Products
QMG Product news and reviews
Catnic Cavity Wall Heavy Duty Lintel CH90 100 1800mm
Steel Lintel Heavy Duty HD/K90
Catnic Timber Frame Lintels CTF7 750mm
Timber Frame Lintels CTF7 Cavity 70-85mm 750mm
Catnic Single Leaf Lintel ANG/MBA 1050mm
Single Leaf Lintel For 102mm Exterior Solid Walls 1050mm
Supreme Coursing Slips 390mm
Overview. For use with Supreme Concrete Beam and Block Flooring, these save a split brick course at side bearing or between end bearing. Manufactured in accordance with EN 771-3:2011. Concrete slips. Dimensions 390mm x 100mm x 40mm.
Celcon Foundation Block 300mm
: Celcon Foundation Blocks enable a quick and reliable construction as only one wall has to be set out and there is no need for wall ties or lean mix fill. Product Specifications. Celcon Foundation Blocks Standard Grade High Strength Grade; Compressive Strength: 3.6N/mm 2: 7.3N/mm 2: Thermal Conductivity: 0.24 W/mK: 0.30 W/mK : Density: 600 kg/m 3: 730 kg/m 3: Product …
Thermalite Foundation Block T&G 300mm
The Thermalite Trench Block T&G 400 x 215 x 300mm is an alternative to the construction of cavity walls with concrete infill, engineering bricks or heavy aggregate blocks for foundations. It is available as Hi-Strength Trenchblock (with compressive strength of 7.3N/mm2) and with tongue and groove joints and handholds for easy handling.
Celcon HI-7 Aerated Concrete Block 100mm
Celcon Block High Strength and Super Strength Grade. H+H’s Celcon Blocks High Strength Grade (7.3N/mm 2 – identified with a black stripe on the block) and Super Strength Grade (8.7N/mm 2 – identified with a red stripe on the block) are ideal where higher compressive strengths are required such as in the foundations and lower storeys…
Celcon Solar Aerated Concrete Block 100mm
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Thermalite Turbo Block 100mm
Thermalite Turbo block has a grey finish. This Thermalite turbo combines all the benefits with very high moisture resistance. This product measures 440 x 215 x 100mm (L x H x W). It contains the BES 6001 responsible sourcing certification for its quality.
