PAROC Hvac Section AluCoat T is a non-combustible stone wool pipe section for thermal and condensation insulation of pipework and air ducts in buildings and ships. It has a reinforced aluminium foil facing and tape in the longitudinal seam which prevents condensation and gives a quick installation.
Archives: QMG Products
QMG Product news and reviews
Alpha Thin Coat Angle Bead 2.4m x 3mm
Drywall Systems angle beads are designed to provide a clean edge on plasterwork and is galvanised to prevent rust and corrosion. Products simply fixed with plaster dabs or nails. Edges, arrises, corners, joints and abutments all easier to form. Designed to minimise potential chipping, cracking and associated damage. Provides a neat finished thin coat plaster edge
Metal Corner Tape 50mm x 30m
Reinforced with aluminium strips and used to support plaster coatings on plasterboard joints.
- 30m x 50mm
- Corrosion-Resistant
- Odourless & Solvent-Free
- Aluminium-Reinforced
Drywall Scrim Tape 50mm x 90m
Self Adhesive Fiber Mesh Tape Used For Gypsum Plastering Process Fiberglass Drywall Joint Tape. Created for use on drywall and cement boards. Designed to cover drywall joints, cracks, and holes on smooth, textured, stucco and popcorn finishes
WonderTex Finishing Compound 25kg
Wondertex prem finish is suitable for the finishing of all plasterboard joints. It is specially developed for hand and machine jointing and may be referred to in the marketplace as joint cement.
Just mix with water for easy application
• Suitable for hand and machine jointing
• Extended working time, less wastage
• Effortless sanding
• No shrinkage so no cracking
WonderTex Filler 12.5Kg
Wondertex Prem Filler is a quick-setting compound for bedding and filling drylining tapes and external metal angles. It has a working time of up to 90 minutes and is easy to sand once dried. This plaster joint filler comes in a 12.5kg bag.
Plasterboard Adhesive 25Kg Any brand
Flexible Foiled Rainscreen Cavity Barrier RS/WB Non Venitlated 200mm x 1m
Flexible foiled cavity barrier consisting of intumescent coated cloth on a galvanised mesh. Made with or without ventilation and drainage holes, used both vertically and horizontally.
- RS/WB/B – non-ventilated
- RS/VWB/B – ventilated with ventilation holes, either, 1, 2, or 3 holes according to the width of the barrier
- RS/WB/CV/B – with an intumescent strip on the face to allow the barrier to have airflow opening up to 100mm. The intumescent strip expands in a fire, filling the opening.
Specify the overall cavity size and required ventilation gap when ordering.
Cavity Barriers are pieces of fire-stopping material. They fit within the cavity of a building at each floor horizontally and party wall in a verticle position. The material provides compartmentation. Both the flames and heat cannot be transferred to other compartmental areas. Throughout the life of the building, the Cavity Barrier will remain fixed in place. In the event of a fire, the intumescent material expands and seals off the gaps. Additionally, the horizontal barriers allow for a ventilation gap within the cavity. Subsequently closing when the intumescent expands.
Fire Rainscreen Cavity Barrier RSM 300mm x 1m
Fireproof rainscreen cavity barrier range, especially designed to offer excellent passive fire protection for rainscreen and other types of cladding. Using fireproof sponge instead of mineral wool, this range offers many advatanges:
- The barrier is much thinner, additionally offering a better fire rating.
- Easy to fix and no masks required.
- Fixing brackets already in place, fix with screws, nails, or spit nails.
Made in 1-metre lengths, with 4 fitting brackets for horizontal application or 3 brackets for vertical. Cut with a sharp knife to fit around metalwork. The cover is made from a strong, intumescent-coated material, completely water-resistant.
The RSM range is the same as the RSF, however, the RSF comes with a foiled reinforced covering which is water-resistant.
Depending on the required fire rating, the barrier can have different thickness. Specify the overall cavity size and required ventilation gap when ordering.
Fire Rainscreen Cavity Barrier RSM 180mm x 1m
Fireproof rainscreen cavity barrier range, especially designed to offer excellent passive fire protection for rainscreen and other types of cladding. Using fireproof sponge instead of mineral wool, this range offers many advatanges:
- The barrier is much thinner, additionally offering a better fire rating.
- Easy to fix and no masks required.
- Fixing brackets already in place, fix with screws, nails, or spit nails.
Made in 1-metre lengths, with 4 fitting brackets for horizontal application or 3 brackets for vertical. Cut with a sharp knife to fit around metalwork. The cover is made from a strong, intumescent-coated material, completely water-resistant.
The RSM range is the same as the RSF, however, the RSF comes with a foiled reinforced covering which is water-resistant.
Depending on the required fire rating, the barrier can have different thickness. Specify the overall cavity size and required ventilation gap when ordering.
