The Manthorpe G950 Weep Vent is used to drain lintels, cavity trays and to ventilate cavity walls. The product can be slotted between two bricks and mortared into position.
QMG Category: Weep Vents
Manthorpe Brown Weep Vent 9mm x 65mm
The Manthorpe G950 Weep Vent is used to drain lintels, cavity trays and to ventilate cavity walls. The product can be slotted between two bricks and mortared into position.
Manthorpe Buff Weep Vent 9mm x 65mm
The Manthorpe G950 Weep Vent is used to drain lintels, cavity trays and to ventilate cavity walls. The product can be slotted between two bricks and mortared into position. It provides an unobtrusive ventilation or drainage point for the cavity behind.
Manthorpe Terracotta Weep Vent 9mm x 65mm
The Manthorpe G950 Weep Vent is used to drain lintels, cavity trays and to ventilate cavity walls. The product can be slotted between two bricks and mortared into position. It provides an unobtrusive ventilation or drainage point for the cavity behind.
Manthorpe White Weep Vent 9mm x 65mm
The Manthorpe G950 Weep Vent is used to drain lintels, cavity trays and to ventilate cavity walls. The product can be slotted between two bricks and mortared into position. It provides an unobtrusive ventilation or drainage point for the cavity behind.
Manthorpe Grey Combination Airbrick 9inch x 3inch
The Manthorpe G930 Airbrick has been designed to provide high levels of ventilation into cavity walls and underfloor voids. The 9″ x 3″ brick is stackable and can be joined together to create larger vent openings. The airbrick features a front mounted grill which consists of evenly spaced…
Manthorpe Buff Combination Airbrick 9inch x 3inch
The Manthorpe G930 Airbrick has been designed to provide high levels of ventilation into cavity walls and underfloor voids. The 9″ x 3″ brick is stackable and can be joined together to create larger vent openings. The airbrick features a front mounted grill which consists of evenly spaced…
Manthorpe Terracotta Peep Weep Vent
Provides an unobtrusive solution to cavity wall drainage requirements
Features a mortar key to ensure adhesion to the building fabric and an external rib to aid positioning. The protective hood is designed to guard against blockage during installation and stops penetration of wind driven rain. The exit hole is ample for water drainage but small enough to prevent entry of large insects. Replaces a single mortar joint
