Thermaroof TR26 is a rigid thermoset insulation core that is perfect for insulating flat roofs waterproofed with mechanically fixed single-ply waterproofing in a variety of new build and refurbishment projects. This board provides high performance and is fibre-free core with a thermal conductivity of 0.022 W/mK, as well as a resistance to the passage of water vapour.
Featuring low emissivity composite foil facings on both sides, this board can be easily integrated with most mechanically fixed single-ply waterproofing systems and green roof systems. Available with FM Approval to FM 4470 – search ‘Kingspan Therma’ on the FM Approvals website for conditions of approval.
- Thermal conductivity of 0.022 W/mK
- Perfect for insulating flat roofs in new build and refurbishment projects
- Includes resistance to the passage of water vapour
- Low emissivity composite foil facings on both sides of the fibre-free rigid thermoset insulation core
- Easily integrated with most mechanically fixed single-ply waterproofing systems and green roof systems
- Easy to handle and install compared to some other commonly used insulants
- 2.4m length x 1.2m width x 80mm thickness
- Four sheets in the pack
- Pack coverage of 11.52m²
- Compressive strength: Average Exceeds 150kPa at 10% compression
Eurothane GP is a general purpose PIR insulation board. Applications include: Pitched Roofs, Solid Masonry Walls, Timber Framed & Steel Framed Systems, Floors. Contains low emissivity foil facings. Thermal Conductivity 0.022 W/mK. Recticel
Kingspan Kooltherm K108 Cavity Board is a premium performance lower lambda insulation with a rigid thermoset fibre-free phenolic core. It is faced on both sides with a low emissivity composite foil facing and is used in partially filled cavity walls. Thermal conductivity – 0.018 W/m.K Facings – Composite foil Core – Premium performance lower-lambda rigid thermoset phenolic insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP). Board size – 1200mm x 450mm
Kingspan Kooltherm K118 Insulated Plasterboard is a premium performance, lower lambda internal wall insulation, with a fibre-free rigid thermoset phenolic core. Kooltherm K118 has a 12.5mm plasterboard bonded to its front surface and a composite foil based facing on its reverse surface. It is suitable for mechanically fixed or plaster dab / adhesive bonded dry-lining. Thermal conductivity – 0.018 W/m.K
Quinn Therm PIR Insulation is a high performance, fibre free board, with a rigid thermoset insulation core and faced on both sides with a low emissivity composite foil facing. The high compressive strength of Quinn Therm QF enables it to withstand the dead and imposed loads transmitted through the floor. Quinn Therm PIR is suitable for new build and refurbishments projects in both domestic and commercial build. With specific properties that optimise the performance of underfloor heating. For suspended timber floors in particular, Quinn Therm PIR reduces heat loss by an air infiltration method, making it the ideal solution for upgrading the thermal performance of existing floors. These low emissivity facings increases its thermal resistance of unventilated air space adjacent to the insulation, improving the roof’s overall thermal performance. Designed for warm pitched or ventilated cold flat roof constructions on new build projects or on refurbishment projects where the roof is to be stripped and re-covered
TB4000 is targeted at cut-to-fit applications between rafters or joists and enables users to achieve lower U-values with a single layer of insulation than has previously been possible. It is also appropriate for use in floors and walls. With low emissivity foil facings, TB4030 is manufactured from rigid polyisocyanurate (PIR) using a blend of blowing agents that have zero ozone depletion potential (zero ODP) and low global warming potential (GWP).
Celotex GA4000 is a multi-purpose insulation board that provides solution to overcome from the localized thermal bridges problem. Featuring a low emissivity foil facings, this board has been manufactured from tough polyisocyanurate (PIR) by using a perfect mix of certain blowing agents which acquires zero ozone depletion potential (zero ODP) and a low global warming impact (GWP). Celotex GA4050 is suitable for use in a number of applications including roof, wall and floor systems.
Cavity insulation retaining disc’s are for restraining brickwork, blockwork and stonework. The Ancon Staifix range of wall ties includes solutions for all types of masonry construction including traditional brick-to-block, thin-joint blockwork and timber frames.
