100mm Kooltherm is a premium performance rigid thermoset-modified resin insulant. It is impervious to air infiltration and the passage of water, as well as effortless to install and handle.
Features & Benefits
- Installation is easy
- Premium performance rigid thermoset insulation – thermal conductivity of 0.019 W/mK
- Unchanged by air infiltration
- Suited to new and refurbished projects
- Resists the passage of water vapour
- Pack Coverage of 8.64m²
Kooltherm K112 is an insulation board for timber and steel frame wall construction and offers thermal conductivity as low as 0.019 W/mK. It can be installed between studs or as an insulating sheathing, making it ideal for both new build and refurbishment projects. Kooltherm K112 is easy to handle and install.
Superglass Superwall is a British Board of Agreement (BBA) approved, non-combustible and water repellent glass mineral wool insulation cavity wall batt.
PIR Insulation Board is a type of floor/wall/roof insulation board composed of a fiber-free rigid polyisocyanurate (PIR) insulation core and has an integral vapor control layer to reduce the risk of condensation. It is faced with aluminium foil layer on both sides. PIR thermal insulation board is a long-lasting product with improved thermal and fire performance. If you are looking for a universal and cost-effective solution for insulating floors, walls, pitched roofs and ceilings then this roof insulation board will be your primary choice.
Use & Application
The insulation board can be used on both new constructions and upgrading the thermal insulation of an existing one. Therefore, it is suitable for:
- Floors
- Pitched roofs & cold flat roofs
- Ceilings
- Timber frame walls & solid walls
Benefits
- Excellent thermal & fire performance
- Environmentally friendly
- Durable and maintenance-free
- Provides a cost-effective mean of reducing CO2 emissions
| Brand |
Xtratherm |
| Thermal Conductivity |
0.022 w/mK |
| Material |
PIR |
| Thickness |
90mm |
| Length |
2400mm |
| Width |
1200mm |
| Coverage |
2.88m2 |
The top insert is used in conjunction with the top plate and top clamp
It slides in the top end of your liner to ensure that a secure connection is made to the top clamp to stop the liner compressing
The basic cowl with mesh is designed to fit directly to your liner to ensure that no rain gets in to your liner, with the enhancement of a mesh casing to stop birds nesting in your liner
The cowl slides over the top of the liner and can be screwed into place with self tapping screws (not supplied) or alternatively can be cemented in to place at the top of the stack
The basic cowl with mesh is designed to fit directly to your liner to ensure that no rain gets in to your liner, with the enhancement of a mesh casing to stop birds nesting in your liner
The cowl slides over the top of the liner and can be screwed into place with self tapping screws (not supplied) or alternatively can be cemented in to place at the top of the stack
The top plate is used at the top of your chimney stack in conjunction with the top clamp and top insert to hold the liner in place should you not have a chimney pot
The top plate is used to seal off your chimney stack, but has a pre-cut hole in the middle for the corresponding size of liner you require
The size of the top plate is 380x380mm