Celotex XR4000 Insulation Board 1200mm x 2400mm x 140mm

XR4000 is a rigid polyisocyanurate (PIR) insulation board with high thermal performance. Available up to 200mm thick, low U-values can be achieved without doubling-up insulation layers. Celotex boards are lightweight and rigid; making them easy to handle, transport, and fit on site, and suitable for applications including: ● Ground floors – whether solid concrete, block and beam, or suspended timber joist, and including where underfloor heating is used. ● Timber and steel framed walls – between the studs. ● Pitched roofs – between the rafters. ● Flat roofs – in ventilated cold roof constructions, installed from inside the building. ● Other retrofit and refurbishment projects – lining existing timber and masonry structures to make them more thermally efficient.

Celotex TB4000 Range Insulation Board 1200mm x 2400mm x 140mm

TB4000 is targeted at cut-to-fit applications between rafters or joists and enables users to achieve lower U-values with a single layer of insulation than has previously been possible. It is also appropriate for use in floors and walls. With low emissivity foil facings, TB4030 is manufactured from rigid polyisocyanurate (PIR) using a blend of blowing agents that have zero ozone depletion potential (zero ODP) and low global warming potential (GWP).

Knauf Earthwool Frametherm Roll 35 2 x 570mm x 3900mm x 140mm 4.45m2

Earthwool FrameTherm Rolls are used for the thermal insulation of external walls and warm roofs in timber frame construction and are friction fitted between studs and rafters. Earthwool FrameTherm Rolls are resilient, non-combustible, glass mineral wool products, supplied at 570mm wide to suit common timber stud centres Earthwool FrameTherm Roll 35 has a thermal conductivity of 0.035 W/mK Sized to friction fit between studs at 600mm centres Easy to handle and install with no gaps between adjacent rolls

Knauf Earthwool Frametherm Roll 35 3 x 380mm x 3900mm x 140mm 4.45m2

Earthwool FrameTherm Rolls are used for the thermal insulation of external walls and warm roofs in timber frame construction and are friction fitted between studs and rafters. Earthwool FrameTherm Rolls are resilient, non-combustible, glass mineral wool products, supplied at 570mm wide to suit common timber stud centres Earthwool FrameTherm Roll 35 has a thermal conductivity of 0.035 W/mK Sized to friction fit between studs at 600mm centres Easy to handle and install with no gaps between adjacent rolls