QMG Variable Size: 1200mm
Paroc AluCoat T Section bulk
PAROC Hvac Section AluCoat T is a non-combustible stone wool pipe section for thermal and condensation insulation of pipework and air ducts in buildings and ships. It has a reinforced aluminium foil facing and tape in the longitudinal seam which prevents condensation and gives a quick installation.
Catnic Box Wall Lintel L2 BSD 140 1200mm
For 140mm Interior Solid Walls.
Offers a cost effective solution for standard duty loads.
Universal application caters for all loading conditions:
- Direct floor or roof load
- Supports concrete floor loads
- Supports point loads e.g. steel beams
- Duplex corrosion protection: Ensures optimum durability and longevity
- Built in plaster key: Ensures excellent plaster adhesion and safety on site
Catnic Box Wall Lintel L2 BSD 140mm 1200mm
For 140mm Interior Solid Walls.
Offers a cost effective solution for standard duty loads.
Universal application caters for all loading conditions:
- Direct floor or roof load
- Supports concrete floor loads
- Supports point loads e.g. steel beams
- Duplex corrosion protection: Ensures optimum durability and longevity
- Built in plaster key: Ensures excellent plaster adhesion and safety on site
Catnic Box Wall Lintel L2 BSD 100 1200mm
For 100mm Interior Solid Walls.
Offers a cost effective solution for standard duty loads.
Universal application caters for all loading conditions:
- Direct floor or roof load
- Supports concrete floor loads
- Supports point loads e.g. steel beams
- Duplex corrosion protection: Ensures optimum durability and longevity
- Built in plaster key: Ensures excellent plaster adhesion and safety on site
Catnic Timber Frame Lintels CTF9 1200mm
- Standard lengths are available in increments of 150mm at lengths up to 3000mm, 300mm at lengths from 3000mm – 4800mm (including 4575 but excluding 4500mm).
- The SWL (safe working load) is based on the total UDL (uniform distributed load) over maximum span using 150mm end bearings.
- All timber frame models must be secured with restraint clips (supplied) and a batten (not supplied) to prevent lateral deflection (twist) during the building stage to achieve the loading figures shown.
- Timber frame lintels should be suitable propped during construction.
IG Timber Frame Heavy Duty Lintel L7/XHD-100 1200mm
For use with timber frame construction. The L7 timber frame lintels must be used in conjunction with lateral restraint clips and a tight fitting timber batten, as shown, to prevent twisting. The L7 range can be supplied to suit wider cavities: e.g. specify L7 75, L7 100. Lintels may be propped to facilitate speed of construction.
Keystone Timber Frame Lintels T/K 90 1200mm
Installation of Keystone’s T/K, HDT/K and XHDT/K are all similar. All Timber frame lintels must be installed with restraining clips and a timber pinch batten to prevent rotation of the lintel during the building stage. Propping may be used to facilitate speed of construction. To achieve the loading figures shown, the T/K lintel must be secured with restraining clips and a timber pinch batten …
Keystone Timber Frame Lintels T/K 70 1200mm
The Keystone XHDTK 70 is an extra heavy duty load lintel used to support openings with cavity widths of 70-85mm.
For use with timber frame construction.
All timber frame lintels must be installed with restraining clips and a timber pinch batten to prevent rotation of the lintel during the building stage. Propping may be used to facilitate speed of construction.
The XHDT/K range can be supplied to suit alternative cavities: e.g. specify XHDT/K-50, XHDT/K-90.
Lintels may be propped to facilitate speed of construction.
Manufactured in 150mm increments.
Keystone Cavity Wall Standard Lintel SK/90 1200mm
. Keystone Lintel S/K-90 Blockwork should be built tight against inner face of the lintel. Place mortar bed on top of blockwork before floor units are laid to provide even distribution of load.
