Mild Steel Flat Bar is generally used for fabrication, frameworks and for structural items. It is stocked in a variety of sizes and dimensions, ready to suit the individual’s needs and requirements; 1.5m lengths, 2m lengths, 3m lengths, 4m lengths and 6m lengths.
Archives: QMG Products
QMG Product news and reviews
Grade S355JR Channel 180 x 90 x 26 1kg/m length 4.700m
Steel grade S355JR is used to manufacture hot-rolled flat and long products, which are subsequently used when producing steel building structures. Classification: Non-alloy structural steel. Products: Flat and long products, semi-finished products. Chemical composition of ladle sample of steel S355JR in accordance with EN 10025-2, % С. Si. Mn. P. S. N. Cu. ≤ 0,24. ≤ 0.55. ≤ 1.60. ≤ 0 …
C24 47mm x 125mm x 2.4m Regularised Treated Sawn Timber
C24 high strength graded timber joists, often specified by architects and used in building projects where premium strength is required. Length of sawn and treated timber, regularised to a consistent size, with eased edges for easier handling, and strength graded to C24.
C24 30mm x 200mm x 3m Regularised Treated Sawn Timber
C24 high strength graded timber joists, often specified by architects and used in building projects where premium strength is required. Length of sawn and treated timber, regularised to a consistent size, with eased edges for easier handling, and strength graded to C24.
Joist Hanger 150mm x 50mm
Joist hangers are used in construction and designed to anchor wooden beams. Primarily in roofs, decking, floors and ceilings for the purpose of creating a strong, long lasting support. When installed correctly a Joist Hanger will preserve the wood joists to which they are attached, as over time the wood will naturally twist and move. A joist hanger will ensure the wood beams keep a true fitting, ensuring long term strength and rigidity.
Hexagon Steel Nut M12 Pk10
Hexagon Steel Nut
ACO 1000MM HexDrain High Strength Drainage Channel with Galvanized Steel Grating
High quality polypropylene channel, suitable for pedestrian and vehicle traffic up to 1.5 tonnes
Channels clip together for quick and easy installation
A choice of six gratings are available to suit your decorative requirements
Galvanised steel is used to provide corrosion resistant channels and the recycled content of ACO galvanised steel is approximately 30%. The steel grating is quick and easy to install onto the HexDrain and gives it a contemporary smooth and shiny finish.
Marley Segmental Ridge – Anthracite
Suitable for roof pitches between 15 and 50 degrees
Compatible with all Marley dry ridge systems.
Traditional concrete ridge fitting
Superglass Superwall 32 Cavity Wall Insulation Batt 125mm (2.18m2)
Superglass Superwall 32 is a British Board of Agreement (BBA) approved, non-combustible and water repellent glass mineral wool insulation cavity wall batt. The flexible batt is supplied at 455mm wide to allow easy installation between standard vertical wall tie spacings and minimum on-site cutting and waste.
Superglass Superwall 32 is designed to provide thermal insulation in full or partial fill in new external masonry cavity walls, up to 25 metres in height for full fill and without restriction for partial fill, in new buildings of a domestic and non-domestic nature.
Ready Mixed Concrete RC35
C35 concrete mix
