Archives: QMG Products

QMG Product news and reviews

Code 4 Lead Flashing Roll – 3m x 450mm

Milled Lead is the only lead flashing manufactured to BS EN 12588, the British Standard for lead and lead alloys. The production process ensures the product is consistent and has a similar thickness throughout the entire length of the roll. It achieves this by passing a lead slab continually through two hydraulic rollers until a specific thickness throughout has been produced. Hence the common name for the product rolled lead .

Code 4 milled lead is as malleable as code 3 lending itself to be the perfect alternative when producing abutment flashings and soakers.   Its flexibility and resistant to wear with its increased gauge makes it a suitable choice for most types of pitched roofing such as hip, ridge, chimney, apron and cover flashings. The extra thickness of lead over code 3 offers additional thermal resistance which enables the pieces of lead you can use to increase to 1.5m in length.

Thickness : 1.8mm

Weight: 18kg

 

 

Code 4 Lead Flashing Roll – 3m x 300mm

Milled Lead is the only lead flashing manufactured to BS EN 12588, the British Standard for lead and lead alloys. The production process ensures the product is consistent and has a similar thickness throughout the entire length of the roll. It achieves this by passing a lead slab continually through two hydraulic rollers until a specific thickness throughout has been produced. Hence the common name for the product rolled lead .

Code 4 milled lead is as malleable as code 3 lending itself to be the perfect alternative when producing abutment flashings and soakers.   Its flexibility and resistant to wear with its increased gauge makes it a suitable choice for most types of pitched roofing such as hip, ridge, chimney, apron and cover flashings. The extra thickness of lead over code 3 offers additional thermal resistance which enables the pieces of lead you can use to increase to 1.5m in length.

Thickness : 1.8mm

Weight: 18kg

 

 

Manthorpe Extension Sleeve G961for Telescopic Underfloor Vent

The G960 Telescopic Underfloor Void Ventilator is designed to provide a clear airflow passage to the void underneath a suspended floor. The telescopic feature enables the ventilator to adjust vertically between three and five brick courses. The right airflow can be achieved when the ventilator is used with a Manthorpe G930 Airbrick. The aperture can also accept a standard clay airbrick, although the airflow is reduced.

DriTherm 32 Cavity Slab 100mm 3.28M2 1200mm x 455mm per pack

100mm Knauf Dritherm 32 is a cavity slab insulation which is made from non-combustible glass mineral wool, it is manufactured using ECOSE®  technology. In addition to this, it is water repellent and specifically designed for use in external masonry cavity walls.  It provides a full-fill insulation solution that is installed while the walls are being built.

100mm Knauf Dritherm 32 is 1200mm Long by 455mm wide which makes it suit the standard vertical wall tie spacings which allow a closed joint with adjacent slabs.

Fibolite Block 100mm 7.3N

Plasmor Concrete Block Fibolite Lightweight Blocks are an ultra-lightweight loadbearing block. This allows a one hand lift, making them faster and safer to build with. These blocks are ideal for housebuilding, extensions, or refurbishment projects. They offer excellent thermal efficiency and are an excellent key for plaster and render.