Superglass Multi-Roll 44 is lightweight, non-combustible glass mineral wool insulation roll. The flexible roll is perforated to allow easy installation between common joist spacings and minimum onsite cutting and waste.
QMG Category: Insulation
Flat Roof Decking Insulation Board 1200 x 2400 x 106mm
106mm thick Insulated Decking Board is a high-performance, pre-insulated thermal roofing solution that provides a simple and cost-effective way to upgrade your flat roof. Made up of a PIR insulation core and a tough plywood exterior, it is suitable for both new build and refurbishment projects alike.
It can be easily and quickly installed as each board measures 2400mm x 1200mm, covering 2.88m², saving both time and money. Additionally, it complies with building regulations and can be used with different flat roof applications such as single-ply membranes, EPDM rubber covers, and torch-on felt.
Superglass Superwall 36 Cavity Wall Insulation Batt 100mm (4.37m2)
Superglass Superwall is a British Board of Agreement (BBA) approved, non-combustible and water repellent glass mineral wool insulation cavity wall batt. The flexible batt is supplied at 455mm wide to allow easy installation between standard vertical wall tie spacings and minimum on-site cutting and waste.
knauf Earthwool Acoustic roll 100mm 12.36m2
Isover Wall Cavity system 32 455mm x 1200mm x 150mm
PK6 2.46m2 CWS 32 A higher performing glass mineral wool full-fill cavity slab providing excellent thermal performance in masonry cavity walls to meet or exceed the requirements of Building Regulations Approved Document L (England and Wales), enabling U-Values as low as 0.23 W/m²K within a 300mm wall width.
Paroc Paroc Mineral Wool Ductwrap 25mm x 1m x 8m
Ductwrap is a non-combustible stone wool foil faced insulation mat
- Non-combustible stone wool mat
- Ideal for thermal insulation of HVAC ductwork
- Reinforced foil backing
- Class O fire rated
- 250°C Maximum service temperature
Ductwrap is available in thicknesses of 25mm, 40mm, and 50mm.
Ductwrap is a light density stonewool mat covered with a reinforced Aluminium foil on one side. Nominal Density is 40 – 45 kg/m³. The limiting temperature of the fibre is more than +1000°C but the rolls should not be used where temperatures are continuously above +250°C.
Paroc HVAC Lamella Mat (Per Roll) × 1 25mm (1m x 9m)
PAROC Pro Lamella Mat AluCoat is a non-combustible stone wool insulation for thermal and condensation insulation of ventilation ducts and equipment. It has a reinforced aluminium foil facing.
- Non-combustible stone wool mat
- Ideal for thermal insulation of HVAC ductwork
- Reinforced foil backing
- Class O fire rated
- 250°C Maximum service temperature
- HVAC 45kg
150mm PIR Insulation Board 2400mm x 1200mm (8′ x 4′)
PIR Insulation Board is a type of floor/wall/roof insulation board composed of a fiber-free rigid polyisocyanurate (PIR) insulation core and has an integral vapor control layer to reduce the risk of condensation. It is faced with aluminium foil layer on both sides. PIR thermal insulation board is a long-lasting product with improved thermal and fire performance. If you are looking for a universal and cost-effective solution for insulating floors, walls, pitched roofs and ceilings then this roof insulation board will be your primary choice.
Use & Application
The insulation board can be used on both new constructions and upgrading the thermal insulation of an existing one. Therefore, it is suitable for:
- Floors
- Pitched roofs & cold flat roofs
- Ceilings
- Timber frame walls & solid walls
Benefits
- Excellent thermal & fire performance
- Environmentally friendly
- Durable and maintenance-free
- Provides a cost-effective mean of reducing CO2 emissions
| Brand | Xtratherm |
| Thermal Conductivity | 0.022 w/mK |
| Material | PIR |
| Thickness | 90mm |
| Length | 2400mm |
| Width | 1200mm |
| Coverage | 2.88m2 |
120mm PIR Insulation Board 2400mm x 1200mm (8′ x 4′)
PIR Insulation Board is a type of floor/wall/roof insulation board composed of a fiber-free rigid polyisocyanurate (PIR) insulation core and has an integral vapor control layer to reduce the risk of condensation. It is faced with aluminium foil layer on both sides. PIR thermal insulation board is a long-lasting product with improved thermal and fire performance. If you are looking for a universal and cost-effective solution for insulating floors, walls, pitched roofs and ceilings then this roof insulation board will be your primary choice.
Use & Application
The insulation board can be used on both new constructions and upgrading the thermal insulation of an existing one. Therefore, it is suitable for:
- Floors
- Pitched roofs & cold flat roofs
- Ceilings
- Timber frame walls & solid walls
Benefits
- Excellent thermal & fire performance
- Environmentally friendly
- Durable and maintenance-free
- Provides a cost-effective mean of reducing CO2 emissions
| Brand | Xtratherm |
| Thermal Conductivity | 0.022 w/mK |
| Material | PIR |
| Thickness | 90mm |
| Length | 2400mm |
| Width | 1200mm |
| Coverage | 2.88m2 |
100mm PIR Insulation Board 2400mm x 1200mm (8′ x 4′)
PIR Insulation Board is a type of floor/wall/roof insulation board composed of a fiber-free rigid polyisocyanurate (PIR) insulation core and has an integral vapor control layer to reduce the risk of condensation. It is faced with aluminium foil layer on both sides. PIR thermal insulation board is a long-lasting product with improved thermal and fire performance. If you are looking for a universal and cost-effective solution for insulating floors, walls, pitched roofs and ceilings then this roof insulation board will be your primary choice.
Use & Application
The insulation board can be used on both new constructions and upgrading the thermal insulation of an existing one. Therefore, it is suitable for:
- Floors
- Pitched roofs & cold flat roofs
- Ceilings
- Timber frame walls & solid walls
Benefits
- Excellent thermal & fire performance
- Environmentally friendly
- Durable and maintenance-free
- Provides a cost-effective mean of reducing CO2 emissions
| Brand | Xtratherm |
| Thermal Conductivity | 0.022 w/mK |
| Material | PIR |
| Thickness | 90mm |
| Length | 2400mm |
| Width | 1200mm |
| Coverage | 2.88m2 |
