QMG Category: Insulation

50mm PIR Insulation Board 2400mm x 1200mm (8′ x 4′)

PIR Insulation Board is a type of floor/wall/roof insulation board composed of a fiber-free rigid polyisocyanurate (PIR) insulation core and has an integral vapor control layer to reduce the risk of condensation. It is faced with aluminium foil layer on both sides. PIR thermal insulation board is a long-lasting product with improved thermal and fire performance.  If you are looking for a universal and cost-effective solution for insulating floors, walls, pitched roofs and ceilings then this roof insulation board will be your primary choice.

Use & Application

The insulation board can be used on both new constructions and upgrading the thermal insulation of an existing one. Therefore, it is suitable for:

  • Floors
  • Pitched roofs & cold flat roofs
  • Ceilings
  • Timber frame walls & solid walls

 

 

Actis H- Control Quilt – 10m2 Pack

H Control Hybrid provides dual performance within a single product. It offers a vapour control layer and insulation, allowing a reduction in the number of installation steps whilst reducing the thickness of the main insulation to achieve the same required uValue.

This H Control Hybrid is a reflective vapour control layer with a built-in thermal performance for use on the warm side of any insulation material, behind the internal finish in roofs, walls and ceilings. It can be used in conjunction with any type of insulation. With minimal air permeability and excellent watertightness, it is airtight and watertight.

Actis Hybris Panel Reflective Multifoil Insulation 105mm – 5.49m2 Pack

Hybris is a reflective insulation product for timber frame or masonry walls, pitched roofs or ceiling applications. Based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils.

The High thermal performance of Hybris is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities.

DriTherm 32 Cavity Slab 100mm 3.28M2 1200mm x 455mm per pack

100mm Knauf Dritherm 32 is a cavity slab insulation which is made from non-combustible glass mineral wool, it is manufactured using ECOSE®  technology. In addition to this, it is water repellent and specifically designed for use in external masonry cavity walls.  It provides a full-fill insulation solution that is installed while the walls are being built.

100mm Knauf Dritherm 32 is 1200mm Long by 455mm wide which makes it suit the standard vertical wall tie spacings which allow a closed joint with adjacent slabs.

Flat Roof Decking Insulation Board 1200 x 2400 x 126mm

126mm thick Insulated Decking Board is a high-performance, pre-insulated thermal roofing solution that provides a simple and cost-effective way to upgrade your flat roof. Made up of a PIR insulation core and a tough plywood exterior, it is suitable for both new build and refurbishment projects alike.

It can be easily and quickly installed as each board measures 2400mm x 1200mm, covering 2.88m², saving both time and money. Additionally, it complies with building regulations and can be used with different flat roof applications such as single-ply membranes, EPDM rubber covers, and torch-on felt.

Flat Roof Decking Insulation Board 1200 x 2400 x 96mm

96mm thick Insulated Decking Board is a high-performance, pre-insulated thermal roofing solution that provides a simple and cost-effective way to upgrade your flat roof. Made up of a PIR insulation core and a tough plywood exterior, it is suitable for both new build and refurbishment projects alike.

It can be easily and quickly installed as each board measures 2400mm x 1200mm, covering 2.88m², saving both time and money. Additionally, it complies with building regulations and can be used with different flat roof applications such as single-ply membranes, EPDM rubber covers, and torch-on felt.