The bright shine of our chrome Fina-E electric towel rail will make your bathroom a joy to use, combining a spotless aesthetic with classic design. This model comes with a 150w output perfect for towel warming and will provide comfortable supplementary heat to smaller spaces. A great choice for petite en suites and guest bathrooms.
QMG Category: Plumbing & heating
Tools
6″ Top Insert
The top insert is used in conjunction with the top plate and top clamp
It slides in the top end of your liner to ensure that a secure connection is made to the top clamp to stop the liner compressing
6″ Top Clamp
The basic cowl with mesh is designed to fit directly to your liner to ensure that no rain gets in to your liner, with the enhancement of a mesh casing to stop birds nesting in your liner
The cowl slides over the top of the liner and can be screwed into place with self tapping screws (not supplied) or alternatively can be cemented in to place at the top of the stack
6″ Basic Cowl With Mesh
The basic cowl with mesh is designed to fit directly to your liner to ensure that no rain gets in to your liner, with the enhancement of a mesh casing to stop birds nesting in your liner
The cowl slides over the top of the liner and can be screwed into place with self tapping screws (not supplied) or alternatively can be cemented in to place at the top of the stack
6″ Top Plate
The top plate is used at the top of your chimney stack in conjunction with the top clamp and top insert to hold the liner in place should you not have a chimney pot
The top plate is used to seal off your chimney stack, but has a pre-cut hole in the middle for the corresponding size of liner you require
The size of the top plate is 380x380mm
6″ Nose Cone
The nose cone is placed on the end of your liner to ensure that your liner doesn’t become damaged as it’s pulled down the stack
Attach the nose cone to the end of the liner that you are going to drop down your stack with draw string (not provided)
You can use gaffa tape to secure the connection of the cone to the liner
6″ Register Plate 18″ x 36
The 6″ register plate is used to seal off the stack at the bottom of your chimney. It comes complete with an adjustable plate for ease of installation and with 2x angle brackets for fixing. The plate is removable should inspection need to be carried out on the liner
You are able to cut the register plate, should it be too large to accommodate the size of your stack
This product will support vermiculite and stop debris from within the stack coming down the chimney and damaging your stove
6″ 1000mm Stove Pipe
This woodstove pipe range is fully interchangeable with our stove pipe plus items
Our woodstove pipe is suitable for gas, oil and multi-fuel appliances, with a rating of up to 50kw
6″ Adaptor to Woodstove Pipe
6″ Woodstove pipe to 6″ flexible liner adaptor
Use this item to connect from your stove pipe to Flexible flue liner
