Libra Systems Galvanised 50mm x 50mm x 3.0m Multipurpose Metal Angle is a hot dip galvanised section suitable for lightweight applications. Ideal for encasement framing when you need extra support and strength.
QMG Category: Metal stud partition
Libra Systems Galvenised Angle 25 x 25mm x 3000mm
Libra Systems Galvanised 25mm x 25mm x 3.0m Multipurpose Metal Angle is a hot dip galvanised section suitable for lightweight applications. Ideal for encasement framing when you need extra support and strength.
Deep Metal Track 52mm x 3000mm
Standard track is a friction-fit system to assemble frames for strong, lightweight and compact partitions. Ideal for use in domestic and commercial use having a length of 3m. Creating non-load bearing partitions, it offers a hassle-free installation and can be upgraded with mineral wool to increase sound insulation.
Metal C Stud 2400mm x 50mm
Metal C Stud 2700mm x 50mm
Metal C Stud 3600mm x 50mm
Metal Track 52mm x 3000mm
Standard track is a friction-fit system to assemble frames for strong, lightweight and compact partitions. Ideal for use in domestic and commercial use having a length of 3m. Creating non-load bearing partitions, it offers a hassle-free installation and can be upgraded with mineral wool to increase sound insulation.
Metal C Stud 3000mm x 50mm
Metal C Stud 3600mm x 70mm
Metal I Stud 3000mm x 70mm
70mm metal I stud is a type of metal framing material that is used to create non-load-bearing interior walls. It is made from galvanized steel and has an I-shaped cross-section. The flanges of the I-beam provide strength and stiffness, while the web helps to prevent buckling.
70mm metal I studs are available in a variety of lengths to accommodate different wall heights. They are typically spaced 400mm – 600mm apart on centre, but this spacing can be adjusted depending on the specific application and size of boards used. The studs are attached to the floor and ceiling joists using metal tracks.
