QMG Category: Loft & roof & partition Insulation

Plysolene Thermo Plastic Sheeting PIB 0.8mm 1m x 15m Chalk

0.8mm Plysolene PIB Thermoplastic Sheeting  is one of the top selling products in the UK with over 40 years long tradition in power stations, oil refineries, airports and chemical works. It is specially designed to provide waterproof wrapping for pipe work and ventilation duct work, manufactured from molecular weight polyisobutylene which enables some very useful characteristics including flexibility, durability, UV and ozone-resistance. It can be used over wide temperature range and it is quite easy to install and use since demanding shapes and joints can simply be cut on site. It is available in standard black colour, but also in white but only for internal applications.

APPLICATION

Plysolene PIB is used as weatherproof and waterproof sheeting for insulated pipe work and ventilation duct work.

Actis H- Control Quilt – 10m2 Pack

H Control Hybrid provides dual performance within a single product. It offers a vapour control layer and insulation, allowing a reduction in the number of installation steps whilst reducing the thickness of the main insulation to achieve the same required uValue.

This H Control Hybrid is a reflective vapour control layer with a built-in thermal performance for use on the warm side of any insulation material, behind the internal finish in roofs, walls and ceilings. It can be used in conjunction with any type of insulation. With minimal air permeability and excellent watertightness, it is airtight and watertight.

Actis Hybris Panel Reflective Multifoil Insulation 105mm – 5.49m2 Pack

Hybris is a reflective insulation product for timber frame or masonry walls, pitched roofs or ceiling applications. Based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils.

The High thermal performance of Hybris is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities.

DriTherm 32 Cavity Slab 100mm 3.28M2 1200mm x 455mm per pack

100mm Knauf Dritherm 32 is a cavity slab insulation which is made from non-combustible glass mineral wool, it is manufactured using ECOSE®  technology. In addition to this, it is water repellent and specifically designed for use in external masonry cavity walls.  It provides a full-fill insulation solution that is installed while the walls are being built.

100mm Knauf Dritherm 32 is 1200mm Long by 455mm wide which makes it suit the standard vertical wall tie spacings which allow a closed joint with adjacent slabs.