URSA Acoustic Roll is for use as an acoustic absorbing material in timber and metal framed partition and separating walls and floors.
Coverage Per Pack – 14.40m2
2 x 600mm Width x 12m
QMG Category: Insulation
PWCB Cavity Barrier 1000mm x 200mm x 100mm
Cavity barriers work to improve a building’s safety by preventing the spread of fire within concealed voids. By specifying and installing the TCB Cavity Barrier or PWCB Cavity Barrier, they provide essential protection whilst also helping to minimise air leakage and heat loss between the external cavity and the separating party wall.
Superglass Superwall 32 Cavity Wall Insulation Batt 125mm (2.18m2)
Superglass Superwall 32 is a British Board of Agreement (BBA) approved, non-combustible and water repellent glass mineral wool insulation cavity wall batt. The flexible batt is supplied at 455mm wide to allow easy installation between standard vertical wall tie spacings and minimum on-site cutting and waste.
Superglass Superwall 32 is designed to provide thermal insulation in full or partial fill in new external masonry cavity walls, up to 25 metres in height for full fill and without restriction for partial fill, in new buildings of a domestic and non-domestic nature.
DriTherm 32 Ultimate Cavity Slab Knauf 125mm 2.18M2
125mm Earthwool DriTherm 32 Cavity Slab is a semi-rigid insulation material made from non-combustible, water repellent, glass mineral wool. They are 1200mm x 455mm wide to suit standard vertical wall tie spacings, ensuring a closed joint with adjacent slabs. Manufactured with Knauf ECOSE Technology – no added formaldehyde binder, which is up to 70% less energy intaensive than traditional binders and is made from rapidly renewable bio-based materials instead of petroleum-based chemicals.
DriTherm 32 Ultimate Cavity Slab Knauf 85mm (pack of 5) 2.73M2
85mm Earthwool DriTherm 32 Cavity Slab is a semi-rigid insulation material made from non-combustible, water repellent, glass mineral wool. They are 1200mm x 455mm wide to suit standard vertical wall tie spacings, ensuring a closed joint with adjacent slabs. Manufactured with Knauf ECOSE Technology – no added formaldehyde binder, which is up to 70% less energy intaensive than traditional binders and is made from rapidly renewable bio-based materials instead of petroleum-based chemicals.
PWCB Cavity Barrier 1200mm x 200mm x 110mm
Cavity barriers work to improve a building’s safety by preventing the spread of fire within concealed voids. By specifying and installing the TCB Cavity Barrier or PWCB Cavity Barrier, they provide essential protection whilst also helping to minimise air leakage and heat loss between the external cavity and the separating party wall.
PWCB Cavity Barrier 1200mm x 200mm x 110mm
Cavity barriers work to improve a building’s safety by preventing the spread of fire within concealed voids. By specifying and installing the TCB Cavity Barrier or PWCB Cavity Barrier, they provide essential protection whilst also helping to minimise air leakage and heat loss between the external cavity and the separating party wall.
Isover AcousticPartition Roll 2 x 600mm x 13m x 50mm
A glass mineral wool roll providing high levels of acoustic insulation in partitions, walls and floors to meet acoustic requirements in domestic and non-domestic applications.
Isover Wall Cavity system 32 455mm x 1200mm x 125mm Pk
- Easy to handle and install
- Reduces heat loss
- Thermal conductivity of 0.032 W/mK
- High thermal performance in external masonry cavity walls
- Resilient to damage
- Minimal on-site waste
- Fully tested and approved for use with drywall and acoustic floor systems
- Manufactured from up to 86% recycled glass
- Zero Ozone Depletion Potential (ODP) and a Global Warming Potential (GWP) of less than 5
- Euroclass A1 fire rating
EPS100 Polystyrene Insulation Board Jablite 50mm x 2.400mm x 1200mm
50mm Jablite EPS 100 board is a lightweight and cost efficient product which can be used for insulation of different constructions, including roofs, floors and walls, since it provides constant and stable thermal performance under different temperature conditions. It is made from expanded polystyrene beads exposed to high temperatures so that a solid block material is made and later on cut and shaped to the desired size.
