QMG Category: Roofing Membrane

Code 4 Lead Flashing Roll – 3m x 240mm

Code 4 milled lead is as malleable as code 3 lending itself to be the perfect alternative when producing abutment flashings and soakers.   Its flexibility and resistant to wear with its increased gauge makes it a suitable choice for most types of pitched roofing such as hip, ridge, chimney, apron and cover flashings. The extra thickness of lead over code 3 offers additional thermal resistance which enables the pieces of lead you can use to increase to 1.5m in length.

Thickness : 1.8mm

Weight: 29kg

 

 

Code 4 Lead Flashing Roll – 6m x 240mm

Code 4 milled lead is as malleable as code 3 lending itself to be the perfect alternative when producing abutment flashings and soakers.   Its flexibility and resistant to wear with its increased gauge makes it a suitable choice for most types of pitched roofing such as hip, ridge, chimney, apron and cover flashings. The extra thickness of lead over code 3 offers additional thermal resistance which enables the pieces of lead you can use to increase to 1.5m in length.

Thickness : 1.8mm

Weight: 29kg

 

 

Cromar Classic Breathable Membrane 1.5M X 50M

A breathable roof underlay for cold and warm roof applications Vent3 Classic is a triple layer fabric, high performance breather membrane, made from high tensile spun bonded polypropylene layers, around a micro-porous polypropylene film. Designed for use in a fully supported or unsupported tiled, slated or metal roof system. The high vapour permeability and waterproof nature of the membrane, combined with excellent tensile/tear strength and high wind uplift resistance make Vent3 Classic the professional’s choice as the ultimate breather membrane.

Code 4 Lead Flashing Roll – 6m x 450mm

Milled Lead is the only lead flashing manufactured to BS EN 12588, the British Standard for lead and lead alloys. The production process ensures the product is consistent and has a similar thickness throughout the entire length of the roll. It achieves this by passing a lead slab continually through two hydraulic rollers until a specific thickness throughout has been produced. Hence the common name for the product rolled lead .

Code 4 milled lead is as malleable as code 3 lending itself to be the perfect alternative when producing abutment flashings and soakers.   Its flexibility and resistant to wear with its increased gauge makes it a suitable choice for most types of pitched roofing such as hip, ridge, chimney, apron and cover flashings. The extra thickness of lead over code 3 offers additional thermal resistance which enables the pieces of lead you can use to increase to 1.5m in length.

Thickness : 1.8mm

Weight: 18kg

 

 

Code 4 Lead Flashing Roll – 3m x 450mm

Milled Lead is the only lead flashing manufactured to BS EN 12588, the British Standard for lead and lead alloys. The production process ensures the product is consistent and has a similar thickness throughout the entire length of the roll. It achieves this by passing a lead slab continually through two hydraulic rollers until a specific thickness throughout has been produced. Hence the common name for the product rolled lead .

Code 4 milled lead is as malleable as code 3 lending itself to be the perfect alternative when producing abutment flashings and soakers.   Its flexibility and resistant to wear with its increased gauge makes it a suitable choice for most types of pitched roofing such as hip, ridge, chimney, apron and cover flashings. The extra thickness of lead over code 3 offers additional thermal resistance which enables the pieces of lead you can use to increase to 1.5m in length.

Thickness : 1.8mm

Weight: 18kg

 

 

Code 4 Lead Flashing Roll – 3m x 300mm

Milled Lead is the only lead flashing manufactured to BS EN 12588, the British Standard for lead and lead alloys. The production process ensures the product is consistent and has a similar thickness throughout the entire length of the roll. It achieves this by passing a lead slab continually through two hydraulic rollers until a specific thickness throughout has been produced. Hence the common name for the product rolled lead .

Code 4 milled lead is as malleable as code 3 lending itself to be the perfect alternative when producing abutment flashings and soakers.   Its flexibility and resistant to wear with its increased gauge makes it a suitable choice for most types of pitched roofing such as hip, ridge, chimney, apron and cover flashings. The extra thickness of lead over code 3 offers additional thermal resistance which enables the pieces of lead you can use to increase to 1.5m in length.

Thickness : 1.8mm

Weight: 18kg

 

 

Diamond GRP Angle Trim

The GRP (Glass Reinforced Polyester) external angle trim has been manufactured form strong fibre glass and is pre-formed and formulated for uses such as copings, flush trimming and neat internal angles and upstands. Additionally, it is used to conceal any features that sit perpendicular to the main roof or any other laminated surface.

Benefits

  • Fire resistant
  • UV resistant
  • Weatherproof
  • Resists heavy foot traffic
  • Ideal for flat roofs
  • Easy to apply & lightweight
  • Load bearing
  • Measures 3m in length

Diamond GRP wall fillet trim

The GRP (Glass Reinforced Polyester) wall fillet trim has been manufactured from durable fibre glass and is designed to be applied where flat roof butts against an existing wall. Moreover, this trim creates a 45° angle to deflect rainwater.

Benefits

  • Made up of high-quality fibre glass
  • Applied where a flat roof butts against an existing wall
  • Creates a 45° angle to deflect rainwater
  • Lightweight & durable
  • Easy to apply
  • UV resistant
  • Crack-resistant
  • Long-lasting
  • Measures 3m in length