Cellcore HX B Under Beam EPS 12 x x2400 x 220mm

220mm Cellcore HX B Under Beam is specially designed to provide foundation protection from ground heave effects when installed beneath reinforced ground beams and pile caps. It is consisted of specially moulded hexagonal cellular Filcor expended polystyrene, available in a number of different depths and grades. Ground movement is caused by the rehydration of clay or expansive shale soils, overburden recovery resulting from deep excavations or, in certain parts of the world, permafrost heave.

EPS Polystyrene Insulation Board 75mm x 2400mm x 1200mm

75mm EPS Silver board is a lightweight and cost efficient product which can be used for insulation of different constructions, including roofs, floors and walls, since it provides constant and stable thermal performance under different temperature conditions. It is made from expanded polystyrene beads exposed to high temperatures so that a solid block material is made and later on cut and shaped to the desired size.

Xtratherm 90mm PIR Insulation Board

100mm Xtratherm PIR Insulation Board Thin- R is a general-purpose use board which measures 2.4m x 1.2m and covers an area of 2.88m2.

90mm Xtratherm PIR Insulation Board properties:-

  • Premium PIR insulation,
  • High energy saving
  • Does not degrade due to moisture
  • Lightweight
  • Easy to Cut
  • Easy to Install
  • Great thermal performance
  • Zero Ozone Depletion Potential
  • Global Warming Potential below 5

Xtratherm 100mm PIR Insulation Board

100mm Xtratherm PIR Insulation Board Thin- R is a general-purpose use board which measures 2.4m x 1.2m and covers an area of 2.88m2.

100mm Xtratherm PIR Insulation Board properties:-

  • Premium PIR insulation,
  • High energy saving
  • Does not degrade due to moisture
  • Lightweight
  • Easy to Cut
  • Easy to Install
  • Great thermal performance
  • Zero Ozone Depletion Potential
  • Global Warming Potential below 5

EPS Polystyrene Insulation Board 60mm x 2400mm x 1200mm

60mm EPS70 board is a lightweight and cost efficient product which can be used for insulation of different constructions, including roofs, floors and walls, since it provides constant and stable thermal performance under different temperature conditions. It is made from expanded polystyrene beads exposed to high temperatures so that a solid block material is made and later on cut and shaped to the desired size.

Kingspan Kooltherm K108 Cavity Insulation Board PK6 450mm x 1200MM x 75mm

Kingspan Kooltherm K108 Cavity Board is a premium performance lower lambda insulation with a rigid thermoset fibre-free phenolic core. It is faced on both sides with a low emissivity composite foil facing and is used in partially filled cavity walls. Thermal conductivity – 0.018 W/m.K Facings – Composite foil Core – Premium performance lower-lambda rigid thermoset phenolic insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP). Board size – 1200mm x 450mm