The top insert is used in conjunction with the top plate and top clamp
It slides in the top end of your liner to ensure that a secure connection is made to the top clamp to stop the liner compressing
The top insert is used in conjunction with the top plate and top clamp
It slides in the top end of your liner to ensure that a secure connection is made to the top clamp to stop the liner compressing
The basic cowl with mesh is designed to fit directly to your liner to ensure that no rain gets in to your liner, with the enhancement of a mesh casing to stop birds nesting in your liner
The cowl slides over the top of the liner and can be screwed into place with self tapping screws (not supplied) or alternatively can be cemented in to place at the top of the stack
The basic cowl with mesh is designed to fit directly to your liner to ensure that no rain gets in to your liner, with the enhancement of a mesh casing to stop birds nesting in your liner
The cowl slides over the top of the liner and can be screwed into place with self tapping screws (not supplied) or alternatively can be cemented in to place at the top of the stack
The top plate is used at the top of your chimney stack in conjunction with the top clamp and top insert to hold the liner in place should you not have a chimney pot
The top plate is used to seal off your chimney stack, but has a pre-cut hole in the middle for the corresponding size of liner you require
The size of the top plate is 380x380mm
The nose cone is placed on the end of your liner to ensure that your liner doesn’t become damaged as it’s pulled down the stack
Attach the nose cone to the end of the liner that you are going to drop down your stack with draw string (not provided)
You can use gaffa tape to secure the connection of the cone to the liner
The 6″ register plate is used to seal off the stack at the bottom of your chimney. It comes complete with an adjustable plate for ease of installation and with 2x angle brackets for fixing. The plate is removable should inspection need to be carried out on the liner
You are able to cut the register plate, should it be too large to accommodate the size of your stack
This product will support vermiculite and stop debris from within the stack coming down the chimney and damaging your stove
This woodstove pipe range is fully interchangeable with our stove pipe plus items
Our woodstove pipe is suitable for gas, oil and multi-fuel appliances, with a rating of up to 50kw
6″ Woodstove pipe to 6″ flexible liner adaptor
Use this item to connect from your stove pipe to Flexible flue liner
6″ FlexiFlue liner is constructed from 316 inner and 316 outer Stainless steel, that carries a lifetime warranty (warranty valid for as long as you own the property)
This product is widely used by the trade when lining chimneys. The 316/316 grade is capable of burning wood, gas, oil and low sulphur coal.